Isabella Alpha 123 Cleaner

Alpha 123 is a biodegradable, non-flammable, non toxic, environmentaly friendly cleaner. It is used to clean whole panels of your awning, not for spot cleaning.

To use simply brush of any obvious dirt and dampen the awning with plenty of clean water. When you are satisfied the awning is evenly wet, spray the Aplha 123 directly onto the surface, foam with the soft brush included with the cleaner. Finish with a thorough rinse off with plenty of clean water. If the awning is particularly dirty you can repeat this process, but be aware Alpha 123 may affect the water resistant properties of the material so you may want to restore with a re-proofing product. A fully waterproof awning is easier to keep clean. 1 Litre of Alpha 123 treats a medium sized awning.

Isabella Aquatex Waterproofing Spray

The Aquatex waterproofing for awnings comes in a 400ml spray can. It is a colourless treatment that is suitable for all textiles that are free of dirt, grease and grime."AquaTex" will not function on dirt; therefore, the canvas should be sprayed on the inside of the awning. If there are any leaks in the material, "AquaTex" will penetrate and be effective on the outside as well. If the material is very dry, you may notice some discolouration on the outside. To regularise the colour, simply spray on the outside as well. DON'T FORGET it is most important to clean the awning inside and out BEFORE impregnation as any deposits on the material will negate the properties of the "AquaTex".

To apply shake the can well before use and spray the entire, clean dry surface. After treating it is important to not fold or store the awning or textile until completely dry. Aquatex is fully effective after 90 minutes at 20°c. Aquatex contains silicone and is made using carbon dioxide as the propellant, which is non-combustible, non-toxic and pollution-free. It does not contain chlorine and is frost resistant. A can of "AquaTex" is handy at all times as it has a wide variety of uses besides impregnating your awning. For instance, if you experience difficulty in drawing your awning beading through the caravan channel, spray the channel and the awning will slip through easily. "AquaTex" can also be used on stiff zips, removal of stains and, even impregnating your shoes or boots.

Isabella Awning Bag

The Isabella Awning Bag is a generous size to fit most awnings. It's approximate dimensions are: 110cm (W) x 40cm (H) x 40cm (D). A Practical storage and transportation bag, made from a heavy duty material. In a black colour with an embroidered Isabella logo and a zip the full length of the awning bag.

Isabella Bayonet Joint Carbon-X 26mm

This 26mm Bayonet Joint fits on the end of a Carbon-X roof pole and connects into a left, right or center connection point. Once inserted into the connection point a simple twist of the pole locks the bayonet joint into the connector. A clear 'open' sign on the side of the bayonet fitting, allows you to twist the pole into the correct position to remove from the joint in which it is situated.

Isabella C Clamp

Pack Qty: 3

The Isabella C Clamp is a simple design to allow the pole connections in awnings to be a quick and easy job. They are most commonly used to connect a verandah pole to the legs enabling an awning panel to be half open. The C Clamps are avaliable in a pack of 3 with screws and wing nuts included.

Isabella Central Pole Connector G12 - G18

The Isabella Central pole connector, made out of nylon is suitable for CarbonX, IXL (fibreglass), Zinox (steel, galvanised both inside and outside) and Prenox (steel, galvanised outside only) poles. It has a spike on the top, three pole openings, one for a leg pole and two for cross poles, as well as a bayonet opening to fit the roof pole. It is suitable for G12 - G18 awnings (approx 736-985 A-measurement).

Isabella Central Pole Connector G19 - G22

The Isabella Central pole connector, made out of nylon is suitable for CarbonX, IXL (fibreglass), Zinox (steel, galvanised both inside and outside) and Prenox (steel, galvanised outside only) poles. It has a spike on the top, three pole openings, one for a leg pole and two for cross poles, as well as a bayonet opening to fit the roof pole. It is suitable for G19 - G22 awnings (approx 986-1185 A-measurement).

Isabella End Clamp

The Isabella End Clamp fitting is for 26mm CarbonX and IXL poles. Once placed on the end of a pole you can add a c clamp or GripOn to make a pole connection such as adding an extra leg. It is supplied as a single unit.

Isabella Curtain Clip Set

Pack Qty: 20 sets

Specialised clips for attaching Isabella curtains to their rails, the larger oblong clip is of a push and click design that affixes to the curtain beading in the Isabella awnings. The small round clip pops onto the eyelet in the curtains. They then fit inside each other to provide easy sliding curtains for keeping out the dark nights in your awning.

Isabella Curtain Elastic

Pack Qty: 2

The Curtain Elastic fits into a small hole located in the black popper strip each side of each window. These popper strips also hold the tie backs on, in the daytime. The elastic stops the curtains flapping forward allowing light to come through the sides and underneath the drawn curtains. Instead it holds the curtain as close to the awning as it can. The curtain elastic comes in a pack of two.

Isabella Door Ties

Pack Qty: 6 sets

Door ties have press studs and are suitable for all Isabella awnings. They have 6 ties in a pack and are 18cm long each. They retain the door once it is rolled or folded back to allow it to stay open without becoming a hazard.

Isabella D Rings

Pack Qty: 10

D-rings are sewn around the bottom edge of the awning to attach the pegging elastics too. The stitching area is approximately 3cm x 1.5 cm with the plastic D-ring attached on one end. They come in a pack of 10 and now only come in a grey colour.

Isabella Dropstop Rain Grommets

Pack Qty: 3

Dropstop Rain Grommets are fitted to the rivots where the spikes on the corner and center brackets push through the awning canvas. They are there to prevent water coming through the opening and flowing inside of the awning. They are avaliable in a pack of three.

Isabella 30cm Plastic Peg

Pack Qty: 4

Isabella pegs come in a bright red colour are lightweight and are 30cm in length. Avaliable in a 4 pack, they utilise a Y-shaped design and hold the ground whilst resisting twisting and bending.

Isabella FixOn II Bracket

Pack Qty: 3

FixOn II screwless brackets are designed for better positioning of roof poles on any model of caravan, these will ensure super tensioning and reduce wear. They attach to a small line of beading that runs parallel to the awning beading with a simple clamp design. All Isabella roof poles fit these brackets, to place the hook in the FixOn II bracket hold the pole vertical, hook into the center hole of the FixOn II and rotate the pole horizontally towards the front of the awning and extend to the bracket in which it fits. Supplied as a pack of 3.

Isabella FixOn II Bracket for Alutech Caravans

FixOn II screwless brackets for alutech caravans are designed for better positioning of roof poles on alutech models of caravan, these will ensure super tensioning and reduce wear. They attach to a small line of beading that runs parallel to the awning beading with a simple clamp design. All Isabella roof poles fit these brackets, to place the hook in the FixOn II bracket hold the pole vertical, hook into the center hole of the FixOn II and rotate the pole horizontally towards the front of the awning and extend to the bracket in which it fits. They are avaliable individually.

Isabella FixOn Multi

Pack Qty: 3

FixOn Multi is the new generation of FixOn fittings which fit all caravans without the use of screws. Designed for easy positioning with better tensioning. Comes in a pack of 3.

Isabella Fixus Locking Clamp

Pack Qty: 3

The Fixus Locking Clamp is for IXL (fibreglass) frames and fits easily onto both sizes of telescopic couplings. It replaces the wing nut fitting for easy and effective tensioning of awning frames. The Fixus comes in two parts, packed in sets of 3 so that some or all of the frame wing nuts can be replaced. This task is easily undertaken with a simple screwdriver. With Fixus in place the tensioned frame can be tightened in position, without force, by pulling the handle towards the thicker pole, EASY!

Isabella FM Pole Connector for Carbon X

Isabella FM pole connector for Carbon X frames is required if you want to add extra roof poles to your awning. It is designed for larger A frame awnings that have small openings in the canvas along the front cross poles. These openings allow the roof pole (inside pole) and the smaller front canopy pole (outside pole) to connect to the front inside cross pole. It has two simple wing nut fittings and comes which the two parts that make up a single connection.

Isabella FM Pole Connector for Zinox

Isabella FM pole connector for Zinox frames is required if you want to add extra roof poles to your awning. It is designed for larger A frame awnings that have small openings in the canvas along the front cross poles. These openings allow the roof pole (inside pole) and the smaller front canopy pole (outside pole) to connect to the front inside cross pole. It has two simple wing nut fittings and comes which the two parts that make up a single connection.

Isabella Frame Bag

The isabella frame bag is a generous size to fit most sets of poles. It's approximate dimensions are: 115cm (W) x 29cm Diameter. A Practical storage and transportation bag, made from a heavy duty material. In a black colour with an embroidered Isabella logo and a zip the full length of the awning bag.

Isabella GripOn

The GripOn is a simple user friendly non slip clamp, it is easy to adjust and lock. It is supplied with a flexible plastic strip that curves back around the clamp when fitted, to protect the awning canvas from rubbing against the metal which could otherwise create rub holes in the canvas. It has a simple lever to tighten the clamp to the pole, eliminating any struggle occuring with other fastenings. There is one GripOn in a pack.

Isabella IsaFix Clamp 22-26mm

Pack Qty: 3

The IsaFix clamp is suitable for All Fibreglass/ CarbonX frames. That’s ALL Isabella since 1989 and ALL Venturas - plus other manufacturers too! It replaces the telescopic couplings with wing nuts for easy and extremely effective tensioning of carbon x frames.

The Isabella Isafix Clamp comes in two sizes in packs of three so that you may replace some or all of the frame clamps. To change simply twist and pull of the existing clamp and push the new Isafix onto the larger of the two poles and replace the thinner pole. There is also the option to adjust the clamp with a screwdriver to give you the correct tension. With IsaFix in place securing the frame position has never been easier. With a one touch and one handed lever to operate - a discreet 'click' in the knock proof clamp tells you that the Isafix is locked.

Isabella IsaFix Clamp 26-30.5mm

Pack Qty: 3

The IsaFix clamp is suitable for All Fibreglass/ CarbonX frames. That’s ALL Isabella since 1989 and ALL Venturas - plus other manufacturers too! It replaces the telescopic couplings with wing nuts for easy and extremely effective tensioning of carbon x frames.

The Isabella IsaFix Clamp comes in two sizes in packs of three so that you may replace some or all of the frame clamps. To change simply twist and pull of the existing clamp and push the new Isafix onto the larger of the two poles and replace the thinner pole. There is also the option to adjust the clamp with a screwdriver to give you the correct tension. With IsaFix in place securing the frame position has never been easier. With a one touch and one handed lever to operate - a discreet 'click' in the knock proof clamp tells you that the Isafix is locked.

Isabella Isaflex Rubber Rings

Pack Qty: 10

Isaflex rubber rings are used for pegging down the awning around the lower panel using the affixed D-rings. They come in a pack of 10 and can be pegged down using a variety of different pegs. They are an elasticated band with a semi-circle shaped fitting connecting the loop.

Isabella Isalink Storm Guys

Pack Qty: 10

The Isalink storm guys are avaliable in packs of 10. The white popper fitting attaches around the lower band of the awning, clipping through the storm guy tab. This fitting allows the included 10 camioplex rubber rings to attach to the awning. Guyline (not included) then ties through the cammpioflex rubber rings securing the awning to the ground.

The Isalink storm guys fit onto all Isabella awnings with storm guy tabs from 1978 onwards. These are an excellent addition to the walls of an Isabella awning when installed correctly they prevent the canvas flapping in and out during high winds.

Isabella Left Corner

The Isabella Left corner is situated on the left hand side when you are standing outside, looking at the front of the awning. It has a spike on the top, an opening for a bayonet joint from a roof pole on the inside edge, and three openings, one for a canopy stub, one for the leg pole, and the other for the cross pole that fits to the centre joint.

Made from nylon it is avaliable singularly and fits Carbon X, IXL (fibreglass), Zinox (steel, galvanised both inside and out) and Prenox (steel, galvanised outside only).

Isabella Shoe with Spike for Zinox and Prenox

Pack Qty: 3

The Isabella Shoe with Spike fits onto the end of the Zinox and Prenox steel poles, if fitted on the Isabella corner leg poles, it will slip into the white corner bands allowing the pole to be extended for proper awning tensioning. There are three in each pack so that you can replace one or more feet at a time.

Isabella Peg Bag

The Isabella Peg Bag can be used for many different purposes. It is insulated and can among other things be used for keeping beverages cool or as an spongebag. It's approximate dimensions are: 10 x 22 x 32 cm. It is made from a heavy duty material comes In a black colour and has an embroidered Isabella logo.

Isabella Right Corner

The Isabella Right corner is situated on the right hand side when you are standing outside, looking at the front of the awning. It has a spike on the top, an opening for a bayonet joint from a roof pole on the inside edge, and three openings, one for a canopy stub, one for the leg pole, and the other for the cross pole that fits to the centre joint.

Made from nylon it is avaliable singularly and fits Carbon X, IXL (fibreglass), Zinox (steel, galvanised both inside and out) and Prenox (steel, galvanised outside only).

Isabella Rubber Grommets

Pack Qty: 3

The Isabella Rubber Grommets prevent water from penetrating through the outer fixings into the awning. The rubber grommets should always be firmly fixed wide side uppermost between frame and canvas. To secure the awning further, rubber grommets can be fitted on the outside, too (wide side lowermost). There are three in a pack.

Isabella Rubber Replacements for Hercules

Pack Qty: 2

This pack of two rubbers fits as a part replacement for the Hercules twin pole tensioner. There are two individual rubber parts in each pack.

Isabella Shoe with Spike for Carbon X and IXL

Pack Qty: 3

The Isabella shoe with spike fits onto the end of the Carbon X and IXL (fibreglass) poles, if fitted on the Isabella corner leg poles, it will slip into the white corner bands allowing the pole to be extended for proper awning tensioning. There are three in each pack so that you can replace one or more feet at a time.

Isabella Sliders for Zips

Pack Qty: 2

If the zip separates in use, don’t worry. The slider is worn and can be easily replaced, the zip is not faulty. This usually occurs when one zip is used for a prolonged period of time and the slider is no longer gripping the zip spirals together.

Zips are an important part of the awning and are often in constant use, it is important to maintain and care for their various parts. Since they do most of the work, the sliders are very exposed to wear and tear, if the zip is separating in use it easy it is to replace the sliders and remedy this. With correct zip maintenance, wear and tear on all awning parts is reduced. The sliders are designed to be removable.

Isabella Stabilo System

Pack Qty: 4 sets

Isabella Stabilo System comprises of loose earth spikes and support feet. The system ensures that windscreens remain securely in place at all times. The system is supplied as standard with all isabella windscreens. These support feet are also available separately for use with awnings.

Isabella Replacement Support Feet for Stabilo System

Pack Qty: 3

Replacement support feet for the Isabella Stabilo System or can be used separately with awnings. The Isabella Stabilo system comprises of loose earth spikes and support feet. The system ensures that windbreaks remain securely in place at all times. The system is supplied as standard with all Isabella windsbreaks.

Isabella Storm Strap

The Isabella storm strap stabalises the awning in strong winds. It is designed to fit on the inside of the awning, preventing rubbing and wear of the canvas material in bad weather. It fits around the inside corner joints and then follows down the leg and stakes into the ground with a heavy duty 40cm stake. It is fitted with an individual rachet to make it easy to create a strong brace to the ground.

Isabella Tear-Aid Patch Repair Set A

Tear-Aid patch repair set A repairs holes and tears instantly. Used for Awning acrylic or polyester (including roofs). The Tear-Aid repair patch A is made from an exceptionally tough, matte finish, abrasion resistant, polyurethane elastomer that resists puncture and tearing. It is combined with an aggressive adhesive formulated for high strength bond to a variety of surfaces such as acrylic, polyester, canvas and nylon. Patch type A provides a simple and easy method of patching holes and tears as well as an excellent protective film.

The Kit B includes: 1 pc. 78 x 150mm patch 1 pc. 36 x 36mm patch 1 pc. 23 x 23mm patch 1 pc. reinforcement filament 2 pc. alcohol prep pads

All of the patches are see-through for any colour of material, they are adhesive on all textures and are suitable for use in all temperatures. The patch's are UV resistant, they cut easily with scissors and remain firm and air tight even when tensioned.

Isabella Tear-Aid Patch Repair Set B

Tear-Aid Patch Repair Set B repairs holes and tears instantly. It is for vinyl only (PVC roofs, awning windows, awning lower panels). The Tear-Aid repair patch B is made from an exceptionally tough, matte finish, abrasion resistant, polyurethane elastomer that resists puncture and tearing. It is combined with an aggressive adhesive formulated for high strength bond to a variety of surfaces such as vinyl and vinyl coated material. Patch B provides a simple and easy method of patching holes and tears as well as an excellent protective film.

The Kit B includes: 1 pc. 78 x 150mm patch 1 pc. 36 x 36mm patch 1 pc. 23 x 23mm patch 1 pc. reinforcement filament 2 pc. alcohol prep pads

All of the patches are see-through for any colour of material, they are adhesive on all textures and are suitable for use in all temperatures. The patch's are UV resistant, they cut easily with scissors and remain firm and air tight even when tensioned.

Isabella Telescopic Coupling for Carbon-X 30.5mm

The Isabella telescopic coupling for Carbon-X frames, clamps telescopic poles into a fixed position. They have a side wing nut fitting and go over the larger of the two poles.

Isabella Telescopic Coupling for IXL (fibreglass) 26mm

The Isabella telescopic coupling for IXL (fibreglass) 26mm, clamps telescopic poles into a fixed position. They have a side wing nut fitting and go over the larger of the two poles.

Isabella Top Organiser

Isabella Top Organiser is a practical storage net that can be hooked onto extra roof rafter poles (also available as optional extras). It has adjustable straps and it is made of black mesh/polyester with a maximum carrying capacity of 5 kg. Use it to store all the holiday things you want to have at your fingertips, sun lotion, playing cards and magazines.

Isabella Top Section Hook for Carbon-X 26mm

The Top Section Hook fits to the end of the roof pole, it connects the frame to the awning. It has a simple push fit design that fits Carbon X poles, with an aluminium hook and a solid plastic base these hooks are extremely lightweight.

Isabella Top Section Hook for Carbon-X 30.5mm

The top section hook fits to the end of the roof pole, it connects the frame to the awning. It has a simple push fit design that fits Carbon-X poles, with an aluminium hook and a solid plastic base these hooks are extremely lightweight.

Isabella T Rex Locking Clamp

Pack Qty: 3

The NEW T-Rex locking clamp for telescopic zinox and prenox frames lives up to it's name. With a powerful bite, it mercilessly locks in place and keeps the poles tensioned in all weather conditions. With one press of the handle a discreet 'click' tells you that the T-Rex is locked in position. T-Rex can be used together with the tensioning tool 'Hercules Twin'. The T-Rex can only be used as a direct replacement to an awning already fitted with the T-Rex Clamp, it cannot be used as an upgrade.

Isabella Typhoon Storm Sash

Pack Qty: 3

Isabella Typhoon Storm Sash strap are heavy duty guylines for stormy conditions. They are avaliable in a set of three, each 3 metres long. They attach to the Isabella awning leather Typhoon eyelets that are on the side and front of some models of the Isabella awning range.

Isabella Wing Nut and Screw Set

Pack Qty: 3 sets

The Isabella wing nut and screw set allows you to replace the wing nut section on the Isabella telescopic couplings for IXL (fibreglass) and Carbon X poles. The set comes in a pack of 3 including nuts, 4 mm screws and the wing tops.

Isabella Zip Covers

Pack Qty: 8

Isabella Zip covers simply slide over the top of the zip puller to maintain a good grip in all weathers. Made from a flexible rubber material, they eliminate noise and look good too! Great present for the caravanner who has almost everything!

Isabella Zip Stop/Feeder Ends

Zips are an important part of the awning and are often in constant use, therefore it is important to maintain and care for their various parts. Since they do most of the work, the sliders are very exposed to wear and tear, it is easy to replace them. The stop end at the end of each zip half can become very worn and may need replacing. This is easy to do with the help of a screwdriver, ordinary contact glue, and a pair af flatnose pliers. With correct zip maintenance, wear and tear on all awning parts is reduced.

Isabella Bayonet Joint IXL, Prenox and Zinox 22mm

This 22mm Bayonet Joint fits on the end of IXL (fibreglass) Prenox (outer steel surface galvanised) and Zinox poles (fully galvanised steel), it connects into a left, right or center connection point. Once inserted into the connection point a simple twist of the pole locks the bayonet joint into the connector. A clear 'open' sign on the side of the bayonet fitting, allows you to twist the pole into the correct position to remove from the joint in which it is situated.